There are two parts to the charging dock pairing process.
1. Probe-to-Dock Pairing
- Open the battery compartment in the back of the new charging dock, remove the white tab under the battery, and check the LED on the front of the dock to make sure it lights up green for 3 seconds after the tab is removed.If you miss the 3-second light, simply take out the battery and put it back in — the LED will light up for 3 seconds when the battery is inserted.
- Put the probe in the dock and let it charge for at least 15 minutes.
- Take the AAA battery out of the dock and wait 30 seconds.
- Put the battery back in and wait 10 seconds.
- Take the probe out of the dock and wait for the LED to blink green after 10 seconds, indicating that the probe has paired to the new dock.The LED will always blink green for 10 seconds after the probe is removed, and then will blink green or red to show the connection status.
2. Dock-to-Phone Pairing
- Tap the 3 dots in the upper right corner of the MEATER app dashboard and select "My Devices".
- Under "My Paired Extender Devices", find the old MEATER Pro that was replaced, then drag it to the left and tap the "x" that appears to unpair it.
- Return to the dashboard.
- Remove the probe from the dock.
- Go through the Quick Start Guide and follow the instructions to pair your new MEATER Pro.When the probe is removed from the dock, a pop-up should automatically appear indicating that there's a device available nearby.If the pop-up doesn't appear, tap the 3 dots in the upper right corner, choose "Add Devices" > "One probe" > "MEATER Pro".
